Linear 1099-50 Single Channel Gate Receiver, 12-24V, 300 MHz or 310 MHz

The Linear 1099-50 Single Channel Gate Receiver, 12-24V, 300 MHz or 310 MHz is designed for use in gate operator applications. An 11-inch wire whip antenna (not pictured) is included for local reception. The whip antenna connects to the receiver’s Type-F antenna connector (not pictured). Also included is 3-feet of coax cable and a bulkhead connector for remotely mounting the whip antenna in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing.

The Model 109950 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency. The 300 MHz frequency is compatible with standard Multi-Code transmitters, the 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.

The operator supplies 12-24 volt power to the receiver, or the receiver can be powered by a separate AC power transformer or DC power supply. The normally open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator’s radio activation terminals.

The receiver is programmed with a 10-position coding switch. When a transmitter set to the same code is activated, the receiver’s output will activate, triggering the gate operator.

Product Documentation

• Linear 109950 Single Channel Receiver Manual
• Multi-Code Product Line Brochure