This is the EMX CarSense 101 Verhicle Motion Detector with a standard 11-pin connector. The CS101 can be seamlessly integrated with security control boards and gate and door operators.Note: This is th..
The EMX HAR-11 wiring harness is an 11 position harness with three feet of wire. This harness can be used in conjunction with the CarSense 101. Entry and Exit Systems offers any parts needed for repai..
The IRB-MON is a monitored, weather-proof, thru beam infrared photoeye solution providing entrapment protection for doors, gates and barriers. The IRB-MON Safety Photo Beam is UL325-2018 compliant and..
The EMX LP D-TEK Loop Detector was designed for applications where low power consumption is desired. The LP D-TEK low-power vehicle detector’s low 9 mA current draw makes it ideal for solar applicatio..
EMX LR-DIPOLE Extended Range Antenna is designed for use with the LR-650 and LR-652 receivers and will extend their radio range to 1,100 ft. The easy-to-install connector plugs into the receiver or mo..
The EMX MVP D-TEK Multi-Voltage Vehicle Loop Detector makes it simple to manage your stock. All you need is one detector in your stock room and on your truck. This multi-voltage vehicle detector solve..
The NIR-50 is an extended range, retroreflective photoeye that provides entrapment protection for overhead doors, gates and barriers. This retroreflective photoeye sensor offers flexible voltages, a c..
The NIR-50 Kit is an extended range, retroreflective photoeye that provides entrapment protection for overhead doors, gates and barriers. This retroreflective photoeye sensor offers flexible voltages,..
The NIR-HD is the metal, protective hood for the NIR-50 sensor. Comes with mounting hardware.Note: NIR-50 is not included.To purchase a kit which includes the hood, see the EMX NIR-50 Retroreflective ..
EMX PC-3 Infrared Modulated PhotoeyeThe PC-3 infrared modulated photoeye sensor is an easy-to-install, cost-effective safety device for garage doors and rolling doors.When the infrared beam is interru..
The EMX PMT-12 is a 12 volt, easy to program timer which provides secure access to any facility at any time. Up to 16 On/Off events per day15 different daily optionsDIN rail mount Battery backup saves..
The EMX PMT-12 is a 24 volt, easy to program timer which provides secure access to any facility at any time. Up to 16 On/Off events per day15 different daily optionsDIN rail mount Battery backup saves..
The REFLECTOR-0-HD is the gray plastic protective hood for the REFLECTOR-O and REFLECTOR-0-EX.Note: This is the hood only! See EMX REFLECTOR-0 for the 3" white plastic reflector.Entry and Exit Systems..